If you are wondering how to open PS4 NAT, ports could help you, for speed up the internet on PS4many players try to get at least the NAT 2. The NAT 3, is what you get after connecting the console to the internet for the first time. This type of NAT occurs because the firewall of the modem or router blocks the ports that allow the PS4 to communicate with the servers of the PlayStation Network. Therefore, port mapping is required to achieve NAT 2.
In this guide, I’ll explain to you how to open PS4 NAT ports. By reading it, specifically, you can understand how to assign a static IP address to the console, how to vary the DNS, and how to unblock the ports on any modem or router.
It is also a valid procedure for custom routers and modems, i.e. those not supplied by the telephone provider, such as models for example Netgear, Technicolor, ASUS, Linksys, TP-Link, and others.
However, before proceeding, I want to tell you that if you have the opportunity to take advantage of a connection PPPoE with an ethernet cable, not WiFi, you’d better read the guide to have NAT 1 on PS4. You may get a more stable and performing connection with NAT 1, especially if you own fiber optics. This is because put simply, the router would be “overridden”. So, there would be no need to open PS4 NAT ports. That said, let’s just get started.
How to open PS4 NAT ports
When you wonder how to open PS4 NAT ports the first thing you need to do is assign a static IP address to the console. Therefore, I advise you to turn on a computer with Windows connected to the same network. After that, open the Command control and scan the network by typing the following string and pressing Enter:
ipconfig/all
You will see all network card connections. Specifically, you will see the data IP address, Subnet mask, Gateways And dns. Write down all the network card configurations except the IP address (it is that of the PC). After that, close the window. Once that is done, find a free IP address for the console. It can be any, as long as it is not in the range of IP addresses used by the DHCP server.
Once you have found all these data, turn on the PS4 and follow the path Settings > Network > Set up internet connection. This will start the wizard. You have to choose, according to the connection you have, the option Use WiFi or Use a network (LAN) cable. After that, on the screen IP address and settings, you must select the option Manual.
Fields will appear as IP address, Subnet mask, Default gateway, Primary DNS, And Secondary DNS. You copy the data you wrote down before, insert some dns custom (optional), and choose After you. Subsequent parameters, such as MTU And Proxy servers, can leave them unchanged (unless you have special configurations).
At the end of the procedure, the PS4 will have a static IP address. Now, you can use that address to open PS4 NAT ports. Below, find the insights to perform port mapping and verify NAT 2.
How to port map for PS4
Although the IP address of the console can not change, you will always have NAT 3. Therefore, you will ask again how to open PS4 NAT ports to obtain NAT 2. Well, to have it, you have to run the port mapping. You have to go back to your computer, open any browser, enter the Default gateway in the address bar and press Enter. Once this is done, you will see the modem or router login page. You must log in with the credentials provided by your ISP (contact them for more information).
Once you have logged in, move to the section Port mappings (the path is not identical for each router). On that screen, you need to add a rule for each port. It’s very simple to do this. The PS4 NAT ports that you need to unblock on the IP address of the console are as follows.
PS4 NAT ports
TCP: 80, 443, 3478, 3479, 3480
UDP: 3478, 3479
Once the configuration is complete, click on Save and close everything.
How to check NAT 2 on PS4
Configure ports, turn on PS4, Settings > Network, and choose Check internet connection. After a few seconds, the result should display next to the entry NAT type written Type 2.
Now that you’ve passed from NAT 3 to NAT 2you won’t wonder how to open PS4 NAT ports anymore. However, I advise you to measure the download speed from a computer (possibly via LAN) and from PS4 to compare both connections and see if they are the same.
If your console’s internet speed is slower and you’re using a wireless network, check the WiFi signal strength or increase it. Alternatively, buy a LAN-type Powerline to connect the PS4 with the Ethernet cable.
Having NAT 2 is helpful, but without a sound “upstream” internet connection the configuration is not practical. Therefore, if you want to play online without lag, ensure your internet speed is right.
