To run specific configurations, you might wonder how to set static ip address ps4. One of the things you will want to do to speed up the internet on PS4, especially if you use WiFi and have no way to connect via LAN, is to get the NAT 2. To have it you have to assign a static IP. Otherwise, leaving the console in DHCP (automatic IP), you cannot open the router ports.
In this regard, I decided to help you by writing this guide. By reading it, you can know how to set static ip address PS4 and how to put custom DNS. Also, you can understand what to do to achieve Type 2 NAT. The procedure is valid for any router or modem. It doesn’t matter whether it’s custom or not. It can be any brand, such as TIM (former Telecom Italy), Fastweb, Technicolor, Netgear, ASUS, D-Link, TP-Link, FRITZ! and other.
However, suppose you can connect the console directly to the modem with an Ethernet cable, perhaps with a Powerline. In that case, you should orient yourself towards another type of configuration, i.e. the PPPoE.
This is because, by doing so, you could obtain the NAT 1 with custom DNS. It would be the best, as the router would be “overridden”. You can consult the guide where I explain how to have NAT 1 on PS4 for more information on this procedure. Let’s see how to proceed regarding NAT 2 and static IP.
How to set PS4 static IP address
The first thing you need to do when wondering how to set static ip address ps4, is to analyze the network you are connected to. Regardless of whether you are connected to the wireless or LAN network, you should see the IP address class, subnet mask, and gateway to understand which configuration to assign to the console. To do this, I advise you to take a Windows computer connected to the same network. After that, open the Command control-type the following string and press Enter:
With this command, you will see the configuration of all network adapters. You need to locate the dot that displays the network adapter details you are interested in. When you find this information, you must write down the Subnet mask and the Default gateway. You don’t have to write down the IP address and DNS.
You can customize them by inserting the best-performing ones (see the following points). Instead, about the IP address, you need to find a free one based on what you see. It cannot be the same because this address is assigned to the PC. If you put that, neither device would work on the network (IP address conflict). Therefore, before setting a PS4 static IP address, you need to know how to spot a free one. Below, I’ll explain how to do it and, subsequently, how to configure it.
How to locate a free static IP address
Before you understand how to set a static ip address on PS4, I must tell you how to spot a free one. Therefore, from the configuration you saw earlier, the IP address of the computer and that of the Gateway emerged. Here, those are to be used as a starting point.
The first thing you need to do is enter the router’s IP or modem (Gateway) in the browser’s address bar. Once this is done, you must log into the router using your credentials (contact your ISP if you don’t know them).
After logging in, first you need to check all connected devices and write down their IP addresses, if they are static. Then, you have to go to the LAN section and check the range of IP addresses which are assigned by the DHCP server. Finally, you have to check for any reserved static IP addresses. By doing so, by exclusion, you can derive a free IP address to assign to the PS4. You can use a PS4 static IP address any. The important thing is that it is not one of those already assigned. However, it is good practice to assign them in an orderly manner. The only thing you will have to pay attention to while checking these parameters are any switched-off devices configured with a static IP address. By default, they are all in DHCP.
From the configuration of the network card (from the PC), you have seen that the IP address of the computer
192.168.1.5 and that of the Gateway is
192.168.1.1. Then, you entered the modem and saw what the range of the DHCP server is
192.168.1.101 - 192.168.1.254. Also, you noticed three other computers connected to the network with static IP addresses.
192.168.1.4, but there is no IP reservation. In this case, you could set a PS4 static IP address putting.
How to assign IP address to PS4
Now I can tell you how to set a static ip address ps4. Therefore, as soon as you have found the free IP address to assign to the console, you can turn it on and log in with your account. From the main screen, follow the path Settings > Network and choose Set up Internet Connection.
A wizard will start to change the network configuration. You must choose to Use WiFi or a network (LAN) cable based on your connection. To ask, “How do you want to set up the internet connection?” you must choose Personalized. After that, in IP address settings, you must choose Manual. You will then see a series of fields to fill in. You will see the entries IP address, Subnet mask, Default gateway, Primary DNS And Secondary DNS.
You must enter the data you have identified, including the static IP address that you have decided to assign. However, I advise you to put those recommended in the next point regarding the DNS.
When you have entered all the data, select After you. The following information is requested: MTU And Proxy servers. Leave them unchanged (unless you have a proxy server). At the end of the procedure, you have succeeded in setting the PS4 static IP address. Now, you can use it to open PS4 NAT ports to get the NAT 2.
Which DNS to put on the PS4
After you understand how to set static ip address, ps4you will ask yourself which DNS to put. By default, those provided by your ISP are configured. The best DNS however, are those of Google or OpenDNS. I recommend you to try them while playing online. They should give you a more stable and faster connection. Details below.
This is the process to follow when you wonder how to set a static ip address ps4. Only then can you know if an IP address is free? No, it’s not just run the ping.